NSN 246EJACK

A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see spacer, plate. Excludes:items with lubricating features, see bearing, sleeve and bushing, sleeve. See also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

round bushing accommodation hole shape, 0.453 inches nominal bushing thru-hole accommodation diameter, bushing mounted long frame body style, three conductor, slender spherical tip single finger accommodated finger type, 0.562 inches nominal body width.

NSN 5935-00-240-3333 Datasheet

(NSN) National Stock Number

5935-00-240-3333

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-240-3333

Requires Demilitarization

Yes

(INC) Item Name Code

00124

Date

Sun, Jan 1, 1961

Schedule B Code

8517700000

Accommodated Finger Type

three conductor, slender spherical tip single finger

Body Style

bushing mounted long frame

Body Width

0.562 inches nominal

Bushing Accommodation Hole Shape

round

Bushing Thru-Hole Accommodation Diameter

0.453 inches nominal

Electrical Insulation Feature

uninsulated

Finger Accommodation Diameter

0.250 inches nominal single finger

Finger Accommodation Length

1.094 inches nominal single finger

Jack Contact Arrangement Designator

j2

Material

copper alloy 745 terminal

Material

copper alloy spring

Mounting Bushing Length

0.500 inches nominal

Mounting Bushing Diameter

0.453 inches nominal

Mounting Hole Diameter

0.156 inches nominal

Mounting Facility Type And Quantity

1 bushing and 1 unthreaded hole(s)

Overall Height

0.812 inches nominal

Overall Length

3.312 inches nominal

Precious Material And Location

spring contact surface gold and terminal silver

Precious Material

gold and silver

Surface Treatment

gold spring

Terminal Type

tab, solder lug

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000124

Cross Reference

CAGE Codes

3B4M0

Lucent Technologies Inc Corporate Headquarters

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

70408

At and T Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-240-3333?

   The FSCG of the NSN 5935-00-240-3333 is 5935

2. Does the NSN 5935-00-240-3333 have a Schedule B code assigned?

   Yes, the Schedule B code is 8517700000

3. Does NSN 5935-00-240-3333 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-240-3333 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-240-3333 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-240-3333 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961