NSN MS3410F14

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

90.0 body angle in deg, 0.940 inches nominal distance from centerline to connector end, 0.868 inches minimum and 0.992 inches maximum distance from centerline to cable end, 0.351 inches minimum and 0.476 inches maximum cable opening diameter, 1 cable opening quantity.

NSN 5935-00-159-0120 Datasheet

(NSN) National Stock Number

5935-00-159-0120

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-159-0120

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Fri, Jul 16, 1971

Schedule B Code

8548900100

Body Angle In Deg

90.0

Cable Opening Quantity

1

Cable Opening Diameter

0.351 inches minimum and 0.476 inches maximum

Distance From Centerline To Cable End

0.868 inches minimum and 0.992 inches maximum

Distance From Centerline To Connector End

0.940 inches nominal

Material

aluminum alloy

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Length

0.290 inches

Nominal Thread Size

0.875 inches

Overall Width

1.006 inches minimum and 1.046 inches maximum

Size Designation

12 and 14 and 14s

Specification/Standard Data

96906-ms3418 government standard

Style Designator

angle type w/clamp

Surface Treatment

cadmium

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

20

Thread Series Designator

unef

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

71468

Itt Cannon Llc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

S - 60.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34370

Water Commodity

743 - Electrical cable

National Motor Freight Classification Item Number

061200

Questions & Answers

1. What is the FSCG of the NSN 5935-00-159-0120?

   The FSCG of the NSN 5935-00-159-0120 is 5935

2. Does the NSN 5935-00-159-0120 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-159-0120 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-159-0120 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-159-0120 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-159-0120 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Jul 16, 1971