NSN S321CCT

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

5.0 single mating end single contact grouping contact maximum current rating in amps, cable clamp connector cable strain relief method, flat socket single mating end single contact grouping included contact type, plastic single mating end insert material, 21 single mating end single contact grouping included contact quantity.

NSN 5935-00-173-8243 Datasheet

(NSN) National Stock Number

5935-00-173-8243

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-173-8243

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Tue, Jan 1, 1963

Schedule B Code

8536695050

Connector Cable Strain Relief Method

cable clamp

Contact Maximum Current Rating In Amps

5.0 single mating end single contact grouping

Included Contact Quantity

21 single mating end single contact grouping

Included Contact Type

flat socket single mating end single contact grouping

Insert Material

plastic single mating end

Mating End Quantity

1

Shell Material

iron

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

71785

Cinch Connectivity Solutions Inc.

U.s./canadian manufacturers

37338

Nautel Limited

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-173-8243?

   The FSCG of the NSN 5935-00-173-8243 is 5935

2. Does the NSN 5935-00-173-8243 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-173-8243 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-173-8243 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-173-8243 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-173-8243 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963