NSN SE6E1512A1.5-4

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

5935-01-331-4546, electrical connector backshell.

NSN 5935-01-331-4546 Datasheet

(NSN) National Stock Number

5935-01-331-4546

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-331-4546

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Thu, Dec 20, 1990

Schedule B Code

8548900100

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

07418

Joslyn Sunbank Company, Llc Dba Joslyn Sunbank Co Llc

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5935-01-331-4546?

   The FSCG of the NSN 5935-01-331-4546 is 5935

2. Does the NSN 5935-01-331-4546 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-331-4546 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-331-4546 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-331-4546 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-331-4546 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Dec 20, 1990